Is power steering fluid exactly the same as transmission fluid?

Yes, in many cases, you can use Automatic Transmission Fluid (ATF) in a power steering pump. Both ATF and power steering fluid are hydraulic fluids, designed to operate in hydraulic systems. In an emergency, or if you find yourself with a low power steering fluid level, using ATF as a temporary substitute can be a viable solution.

In fact, some vehicle manufacturers, particularly older models, actually specify ATF as the correct fluid for their power steering systems. To be sure, always check your vehicle's owner's manual to see if ATF is a recommended fluid for your power steering system.

High-performance PSF Synth power steering fluid, 1-liter bottle, by 77 Lubricants. Made in Holland for advanced anti-wear hydraulic protection.

Is Power Steering Fluid and Transmission Fluid the Same?

While they are both hydraulic fluids, power steering fluid and transmission fluid are not the same. They have distinct chemical compositions and additive packages tailored for their specific systems.

• ATF (Automatic Transmission Fluid): This fluid is formulated with detergents and friction modifiers to handle the high heat and friction of a transmission's internal components, such as clutch packs and gears.

  
  

• Power Steering Fluid: This fluid is designed to lubricate the power steering pump and protect the seals within the system. It typically has a different viscosity and additive package that is not suitable for a transmission.

  
  

Using the wrong fluid can have negative consequences, such as:

• Damage to seals: The different additives in ATF can potentially harm the seals and O-rings in your power steering pump and rack, leading to leaks.

  
  

• Poor performance: The specific properties of power steering fluid are tailored for precise steering, and a substitute might lead to a less responsive or noisy steering system.

  
  

• System Contamination: Mixing fluids can alter their chemical properties and reduce their effectiveness over time.

Why are they similar?

The main reason you can often use these fluids interchangeably is that they both serve as a medium for transmitting hydraulic power. They are designed to operate under pressure and high temperatures.

• ATF: Contains detergents that help clean the system and friction modifiers for smooth gear operation.

• Power Steering Fluid: Contains specific additives to prevent corrosion and protect the seals in the power steering system.

Is it a good idea to mix them?

While you can use ATF in a power steering system, it is not a perfect substitute. It is not recommended to use ATF as a long-term solution unless your vehicle manufacturer specifically calls for it.

Using the incorrect fluid can have negative consequences, such as:

• Damage to seals: The different additives in ATF can potentially harm the seals and O-rings in your power steering pump and rack, leading to leaks.

• Poor performance: The specific properties of power steering fluid are tailored for precise steering, and a substitute might lead to a less responsive or noisy steering system.

• System Contamination: Mixing fluids can alter their chemical properties and reduce their effectiveness over time.

What Happens If Power Steering Fluid Is Low?

If your power steering fluid is low, you may notice several issues that indicate a problem:

• Difficult Steering: The steering wheel will feel heavy and difficult to turn, especially at low speeds.

• Noisy Pump: You may hear a whining, moaning, or groaning noise when you turn the steering wheel. This is the power steering pump struggling due to a lack of fluid.

• Overheating: The pump can overheat and fail if it operates with insufficient fluid.

• Leaks: Low fluid levels often indicate a leak in the system, which should be addressed by a professional.

EVEREST ATF-III Automatic Transmission Fluid: Multi-purpose fluid designed for use in transmissions requiring DEXRON® or MERCON® performance standards, available in a 1 US quart (946 ml) bottle.

• Can You Put Power Steering Fluid into Your Transmission?

  
  

  No. While both are hydraulic fluids, you should never put power steering fluid into your automatic transmission.

  Automatic transmissions have very specific fluid requirements, including friction modifiers, detergents, and anti-foaming agents that are not present in standard power steering fluid. Using the wrong fluid can cause:

  • Clutch Slippage: The transmission's clutch plates will not engage properly.

  • Overheating: The fluid won't be able to effectively dissipate heat.

  • Damage: It can cause severe internal damage to the transmission's seals, gears, and pump, leading to a complete transmission failure.

  
  

  
  

  
  

  Final Recommendation

  
  

  The best practice is always to use the fluid specified by your vehicle's manufacturer. The correct fluid is designed to protect your vehicle's components and ensure optimal performance. While ATF can serve as a temporary emergency fluid for a power steering system, it is not a long-term solution unless explicitly recommended. Never use power steering fluid in an automatic transmission.